Selectric Resources

 

SHIFT CAM REMOVAL

 

1. Turn the typehead counterclockwise and remove the released rotate tape from the shift arm pulley.

 

NOTE: On one—piece shift arm, the rotate tape must be disconnected from the right side of the carrier.\

 

2. Remove the shift interlock spring, the shift release arm spring and the shift detent spring.

3. Remove the “C” clip from the operational shaft and remove the shift clutch ratchet.

 

7X1

4. Remove the interlock.

5. Remove the detent arm.

6. Disconnect the shift release link.

7. Remove the shift release arm.

 

XX3—XX5

4. Disconnect the shift release link.

5. Remove the shift support bracket screw.

6. Remove the shift support bracket, interlock and shift release lever as an assembly.

7. Remove the detent arm.

 

All

8. Remove the shift clutch spring (behind the ratchet).

 

NOTE: Observe the spring position for replacement.

 

9. Remove the shift clutch arbor.

10. Remove the shift cam.