Selectric Resources

 

ROCKER ASSEMBLY REMOVAL

 

1. Remove the ribbon mechanism.

2. Remove the cardholder brackets.

3. Slowly release the rotate spring tension.

4. Disconnect the rotate tape.

5. Disconnect the tilt tape.

6. Remove the gearless tilt pulley,

7. Remove the tape guide.

8. Remove the striker if present.

9. Remove the rotate spring.

10. Remove the rotate pulley.

11. Remove the impression control or velocity plate.

12. Loosen the rocker shaft setscrew.

13. Remove the “C” clip from the right side of the rocker shaft.

14. Remove the rocker shaft.

15. The rocker assembly may now be removed from the carrier.