Please enable JavaScript to view this site.

Selectric Resources

Navigation: Homepage > Service Manual S241-5615-3 > Removal Procedures

Installation of 54 Tooth Ratchet Assembly

 Scroll Prev Top Next More

 

INSTALLATION OF 54 TOOTH RATCHET ASSEMBLY

 

1. Install grip clip, index bracket and spacer on index selector lever mounting stud.

2. Install selector cam on index selector lever using stud and “C” clip.

3. Install stud with nut and washer on index bracket.

4. Install selector lever.

5. Install spring on stud and engage selector cam and hold in place with “C” clip.

6. Remove detent roller from old-level detent assembly and install on new detent.

7. Install detent assembly using stud that was in machine and detent release lever mounting stud.

8. Install “C” clip that was on stud.

9. Install tilt pulley bracket and keeper. Connect tilt spring.

10. Install detent release lever.

11. Install pawl assembly.

12. Install feed roll release lever.